The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets. Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
Showing all 103 results
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 30 Cal (.309) 165gr RNFP 2500 ct
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 30 Cal (.309) 165gr RNFP 500 ct
27 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 30 Cal (.309) 165gr RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
22 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 32 Cal (.313) 78gr RN 1000 ct
23 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 32 Cal (.313) 78gr RN 6000 ct
4 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 32 Cal (.313) 78gr RN SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
12 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 32 Cal (.313) 115gr RNFP 4000 ct
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 32 Cal (.313) 115gr RNFP 500 ct
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 32 Cal (.313) 115gr RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
1 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Caliber 105 Grain 4000 ct
7 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Caliber 105 Grain 500 ct
25 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Caliber 105 Grain SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
16 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 125gr Grain RNFP 3500 ct
4 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 125gr Grain RNFP 500 ct
23 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 9mm Round Nose 124 Grain SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
14 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 125gr Grain TCFP 3500 ct
6 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 125gr Grain TCFP 500 ct
17 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 125gr Grain TCFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
23 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 140gr Grain TCFP 3000 ct
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 140gr Grain TCFP 500 ct
17 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 140gr Grain TCFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
33 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 148gr Grain WC 3000 ct
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 148gr Grain WC 500 ct
21 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 148gr Grain WC SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
10 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 158gr Grain RNFP 2500 ct
7 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 158gr Grain RNFP 500 ct
20 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38 Cal (.358) 158gr Grain RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
19 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38-40 Cal (.401) 180gr Grain RNFP 2500 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38-40 Cal (.401) 180gr Grain RNFP 500 ct
4 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38-55 Cal (.378) 245 Grain RNFP 1500 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38-55 Cal (.378) 245 Grain RNFP 500 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38-55 Cal (.378) 245 Grain RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38-55 Cal (.378) 245 Grain RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38-55 Cal (.380) 245 Grain RNFP 1500 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38-55 Cal (.380) 245 Grain RNFP 500 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 38-55 Cal (.380) 245 Grain RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 40 Cal 10mm (.401) 180 grain TCFP 2500 ct
10 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 40 Cal 10mm (.401) 180 grain TCFP 500 ct
31 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 40 Cal 10mm (.401) 180 grain TCFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
20 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 40 Cal 10mm (.401) 200 Grain RN 2000 ct
2 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 40 Cal 10mm (.401) 200 Grain RN 500 ct
17 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 40 Cal 10mm (.401) 200 Grain RN SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
8 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 41 Cal (.411) 225 Grain RNFP 2000 ct
3 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 41 Cal (.411) 225 Grain RNFP 500 ct
14 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 41 Cal (.411) 225 Grain RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
10 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.427) 200gr RNFP 2000 ct
14 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.427) 200gr RNFP 500 ct
23 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.427) 200gr RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
6 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.428) 200gr RNFP 2000 ct
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.428) 200gr RNFP 500 ct
21 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.428) 200gr RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
7 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.429) 180gr TCFP 2500 ct
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.429) 180gr TCFP 500 ct
3 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.429) 180gr TCFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
9 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.429) 200gr RNFP 2000 ct
4 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.429) 200gr RNFP 500 ct
12 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.429) 200gr RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.430) 180gr TCFP 2500 ct
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.430) 180gr TCFP 500 ct
9 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.430) 180gr TCFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
24 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.430) 200gr RNFP 2000 ct
9 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.430) 200gr RNFP 500 ct
13 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.430) 200gr RNFP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
21 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.430) 240gr SWC (Keith Style) 1500 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.430) 240gr SWC (Keith Style) 500 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 44 Cal (.430) 240gr SWC (Keith Style) SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
3 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 180gr RNFP COLT 2500 ct
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 180gr RNFP COLT 500 ct
6 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 180gr RNFP COLT SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
19 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 185gr SWC ACP 2500 ct
4 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 185gr SWC ACP 500 ct
8 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 185gr SWC ACP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
10 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 200gr RNFP COLT 2000 ct
6 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 200gr RNFP COLT 500 ct
22 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 200gr RNFP COLT SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
21 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 200gr SWC ACP 2000 ct
1 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 200gr SWC ACP 500 ct
4 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 200gr SWC ACP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
5 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 230gr RN ACP 2000 ct
8 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 230gr RN ACP 500 ct
25 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 230gr RN ACP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
13 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 250gr RNFP COLT 1500 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 250gr RNFP COLT 500 ct
3 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 250gr RNFP COLT SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 2lbs
10 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 325gr TCFP 1000 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.452) 325gr TCFP 250 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.458) 300gr RNFP 1500 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.458) 300gr RNFP 250 ct
25 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.458) 350gr RNFP 1000 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.458) 350gr RNFP 250 ct
8 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.458) 405gr RNFP 1000 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 45 Cal (.458) 405gr RNFP 250 ct
4 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 50 Cal (.501) 400gr RNFP 1000 ct
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 50 Cal (.501) 400gr RNFP 50 ct
7 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 9mm Round Nose 115 Grain 4000 ct
3 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 9mm Round Nose 115 Grain 500 ct
21 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 9mm Round Nose 115 Grain SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
15 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 9mm Round Nose 124 Grain 3500 ct
7 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 9mm Round Nose 124 Grain 500 ct
13 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 9mm Round Nose 124 Grain SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
15 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 9mm (.356) 147gr FP 3000 ct
3 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 9mm (.356) 147gr FP 500 ct
14 in stock
Choice Ammunition is pleased to announce our acquisition of Chey-Cast Bullets in 2023- Chey-Cast has been a leading supplier in the reloading community for decades. Choice Ammunition has used the Chey-Cast products in our Cowboy Choice, Hard Cast Bear Defense and Range loads. We now offer these quality, USA made products to our reloading customers, along with Starline Brass!
For these bullets, we use the unique heat-set “HI-TEK Super Coating”. The Coating Totally encapsulates the lead projectiles and replaces standard wax lube. Our bullets are Hard Cast at 16- 18 Brinell. We Use 92% lead / 6% Antimony /2% Tin for casting all Range and Cowboy Action bullets.
Developed in Australia over 25 years ago, Hi-Tek Heat Set Super Coat was developed specifically for commercial bullet casters to provide reloaders with a cast bullet that didn’t smoke and gum up reloading dies like a traditional wax lubed bullet. This coating molecularly bonds to the lead, encasing the entire projectile in a protective shell that is self-lubricating. This proprietary coating contains no PTFE or Moly.
What this means to you? No messy wax lubes that smoke, gums up your reloading dies or bullet feeders. Since the bullet is totally encapsulated, it also greatly reduces your exposure to lead. Cleaner hands, cleaner guns and cleaner air are all benefits of the Hi-Tek Supercoat. Safe and approved for Indoor Range Shooting!!
HI-TEK SUPERCOAT 9mm (.356) 147gr FP SAMPLE PACK, Approximate Bullet count divide the 7000 by the bullet Grain for 1lbs
Showing all 103 results
In these challenging times in our industry, things change quickly. One day, we are well stocked up on an item, and the next day, we could be out. We are doing everything possible to hand-load our ammunition and get products shipped in a timely manner, but we cannot simply turn machines up like the “factories” do! Yet, we are resourceful in our ways- and usually have ammunition when others do not.
We also strive to provide tremendous customer service. We try to answer all office calls- and actually prefer calls over emails or social media. After your order, our in-stock items typically ship within 24 hours!
From time to time- we do offer industry updates, special promotions, or announcements of new products. If you care to register with us below, we will be sure to include you in these email updates. (We do not share our list with others- or inundate you with emails all the time).
Thank you for considering Choice Ammunition if you are a new customer- and thank you for another order if you are returning with us again! We truly appreciate all of you, and value each and every order that is made with us.
Jon Wemple
President/CEO
“Jon, Your attitude and true customer care and service is remarkable. Rare in today’s business world. Thank you again for a great experience with your company. Kudos to Marilyn also.”
Sincerely,
Charlie G.